-
Simulate ACU, Verify the performance of Motorized Seatbelt;
-
Support 1 channel CAN message send with CAN-HS or CAN-FD;
-
Support 2 channels PWM output;
-
Support trigger events input by ARM, T0, IN_1 and IN_2;
-
UPS Battery inside work over 5 hours;
-
2×JBUS interface, daisy connect with other devices easily.
The ACU Sender ACU-3C is mainly used in sled or vehicle crash tests to simulate the ACU to perform functional verification of components based on CAN and PWM protocols (such as motorized seatbelt), thereby quickly developing vehicles. The sending of CAN messages and PWM can be based on ARM, T0, digital input and other markers to send single or cyclic messages. Command editing software is provided, which can be automatically executed offline during testing. The device has a built-in lithium battery and has UPS function.
Specification:
|
Name |
Unit |
Value |
|
BUS Channel |
Channels |
1×CAN
2×PWM |
|
CAN Baud Rate |
kbps |
2000 max. |
|
PWM Frequency |
Hz |
4000 max. |
|
Trigger Event |
Switch |
T0, IN_1, IN_2 |
|
Wake-up message |
/ |
Yes |
|
CRC bit |
Auto |
Yes |
|
Power Input |
V |
24~55 |
|
Battery Work Time |
hours |
5 |
|
Anti-Shock |
g |
≥100@6ms |
|
Opera. Temp. |
℃ |
-20－+60 |
|
Materials |
/ |
Al. Alloy |
|
Dimension |
mm |
230×64×70 |
|
Weight |
kg |
1.2 |
Software Ref.
Interface Connectors:
CAN BUS ODU GK0L0C-P05Q：
|
Pin 2 |
5V-CAN |
|
Pin 3 |
GND-CAN |
|
Pin 4 |
CAN-H |
|
Pin 5 |
CAN-L |
Trigger Input TRG IN ODU GK1L0C-P05Q：
|
Pin 1 |
Switch T0+ |
|
Pin 2 |
Switch T0- |
|
Pin 3 |
Switch SR+ |
|
Pin 4 |
Switch SR- |
JBUS A and B ODU GK2L0C-P16Q:
|
Pin 1，11，12 |
Power Input + |
|
Pin 2，3，13 |
Power GND |
|
Pin 4, 5, 6, 14 |
Ethernet |
|
Pin 7, 8 |
Trigger T0 RS485 |
|
Pin 15, 16 |
Trigger SR RS485 |
|
Pin 9 |
Trigger GND |
|
Pin 10 |
Trigger Terminal |
Event Input IO ODU GK1L0C-P04Q：
|
Pin 1 |
IN_1+ |
|
Pin 2 |
IN_1- |
|
Pin 3 |
IN_2+ |
|
Pin 4 |
IN_2- |
